Slabs are imported from factories with international reputation.
2. Slabs Cutting
Slabs are cut based on the ordered plate size.
The cutting results are inspected before further process.
4. Reheating Furnace
The slab pieces are heated in a furnace to a standard temperature, in accordance with the quality and size.
The smoldered slabs are cleaned with crust-cleaning machine to remove the grime from pervious processes.
6. 3-High Roughing & Finishing Mill
Slabs are milled with 3-High Reversing Roughing & Finishing machine.
7. Hot Leveler
Grade surface plate is used to ensure the flatness and plate quality.
8. Dividing Shear
The extended plate from previous processes are cut shorter with a divisor.
9. Cooling Bed
Cooling Bed helps the hot plates to cool naturally, until they reach ambience temperature.
The physical aspect and surface of the steel plates are carefully examined, both the top and bottom part.
11. Plate Cutting
The plates are cut in accordance with the order. Flame cutting is used if the thickness is 15 mm or thicker. Flame cutting is a cutting process with a mixed weld of LPG and oxygen. If the thickness is less than 15 mm, mechanized side shear is used to cut.
All plates are stenciled at the top part.
Plate pieces are tested in the laboratory.
The finished plates are stored and ready to be shipped.
Quality steel plates are ready to be shipped to the customers.